深圳市龙夫化工有限公司
- 电话:
- 0755-83423692
- 手机:
- 13554780376
- 联系人:
- 刘工
- QQ:
- 29184367
- 邮箱:
- lj197605@126.com
标题:德国亚拉Aral-Vitam-GF32-46-68是一种HLP型高性能无锌液压润滑油
Aral Vitam GF 32,46,68
Hydraulic oil HLP type
Applications:
Aral Vitam GF 32,46,68 is a high-performance, zinc free hydraulic oil corresponding to the type HLP. This product
fulfills the requirements of the DIN 51524-2, with a large margin of reserve. Due to the properties of this
hydraulic oil, it has an excellent wearing protection over a broad load range, very good air and water
separation ability, minimal foaming tendency, optimal corrosion prevention, good sealing consistency and a
high ageing stability.
Operational area:
Aral Vitam GF 32,46,68 can be used where special thermal or mechanical loads require high-performance hydraulic
oils. Aral Vitam GF 32,46,68 is a product that can be universally applied. This hydraulic oil has a proven reliability
with many years of in the field use. Aral Vitam GF 32,46,68 meets specification requirements of reputed
manufactures of hydraulic pumps and motors, and the following approvals/ recommendations apply:
-Hagglund-Dension HF-0; HF-2
-Vickers Industrieanlagen, I-286-S-Spezifikation
-Cincinnati M. - S. 68-69-70
Technical Data(the following technical data is GF32, and the corresponding viscosity and other values need to be added for gf46, 68)
Density at 15 °C g/ml DIN 51757 0.872
Viscosity
0 °C mm2/s DIN 51562 322
40 °C mm2/s DIN 51562 32
100 °C mm2/s DIN 51562 5,26
Viscosity Index DIN ISO 2909 102
Pourpoint °C DIN ISO 3016 -27
Flash point COC °C DIN ISO 2592 200
Oxide ash Gew.% DIN EN ISO 6245 <0.01
Neutralization number mg KOH/g DIN 51558-1 0.1
Ageing characteristics
Increase n.n. after 1000 h mgKOH/g DIN 51587 <2.0
Air release time at 50 °C min DIN 51381 <5
Corrosiveness
on copper Korr. Grad. DIN EN ISO 2160 1-100 A3
on steel Korr. Grad. DIN ISO 7120 0-A
Foaming characteristics
at 24 °C ml ISO 6247 <50/0
at 95 °C ml ISO 6247 <50/0
at 24 °C after 95 °C ml ISO 6247 <50/0
FZG test A/8,3/90 SKS DIN 51354-2 >=10
Demulsion character. at 54 °C min DIN 51599 <30
Remarks:
<br>
All data is subject to development for the product and the production process.
Version-No.: IS1811050019
以下是上面原版产品Aral Vitam GF 32说明的翻译。
Aral Vitam GF 32,46,68
液压油HLP型
应用:
Aral Vitam GF 32,46,68是一种与HLP型相对应的高性能无锌液压油。这个产品满足DIN51524-2的要求,具有很大的储备空间。因为它的特性液压油,在广泛的负载范围内有很好的耐磨性,空气和水都很好分离能力,最小起泡倾向,最佳防腐,良好的密封稠度和高老化稳定性。
操作区域:
Aral Vitam GF 32,46,68可用于特殊热负荷或机械负荷需要高性能液压的地方油。Aral Vitam GF 32是一种可以广泛应用的产品。这种液压油经证实是可靠的有多年的野外使用经验。Aral Vitam GF 32符合著名的液压泵和电机的制造商,以及以下批准/建议适用:
-海格朗德密度HF-0;HF-2
-维克斯工业署,I-286-S-Spezifikation
-辛辛那提M.-S.68-69-70
技术数据(以下技术数据是GF32的,GF46,68需要增加相应的粘度等数值)
15°C下的密度g/ml DIN51757 0.872
粘度
0°C毫米/秒德国工业标准51562 322
40°C毫米/秒德国工业标准51562 32
100°C毫米/秒德国工业标准51562 5,26
粘度指数
Pourpoint°C德国工业标准ISO 3016-27
闪点COC°C DIN ISO 2592 200
氧化物灰烬GEW.%DIN EN ISO 6245<0.01
中和值mg KOH/g DIN 51558-1 0.1
老化特性
1000小时后增加n.n.mgKOH/g DIN 51587<2.0
50°C下的空气释放时间min DIN 51381<5
腐蚀性
在古铜上。Korr. Grad.。德国标准EN ISO 2160 1-100 A3
在钢铁厂。Korr. Grad.。德国工业标准ISO 7120 0-A
发泡特性
24°C时,ml ISO 6247<50/0
95°C时,ml ISO 6247<50/0
在95°C后的24°C下,ml ISO 6247<50/0
FZG试验A/8,3/90 SKS DIN51354-2>=10
乳化性。在54°C下,最小DIN51599<30
评论:
<br>
所有数据均以产品和生产过程的开发为准。
版本号:IS1811050019
本文关键词:Vitam GF32,Vitam GF46,Vitam GF68,德国亚拉液压油